3f:I[36139,["7768","$16","239","$2d","7721","$2e","881","$17","7095","$2f","8500","$18","3165","$30","6113","$31","5649","$32","1247","$19","9698","$1a","7858","$1b","2562","$1d","8318","$1e","9839","$33","7752","$34","5772","$1f","8335","$20","2444","$35","8385","$36","1475","$37","2183","$38","2819","$22","9513","$39","526","$3a","8913","$3b"],"default"] 40:T123a,

Overall dimensions:

Description:

Maximum load: 35 kg
A high-precision, high-strength worm gear is used, which automatically locked when power is turned off
High positioning accuracy: up to ±0.1°
Protection class: MAX IP66
The housing is made of high-strength die-cast aluminum alloy, resistant to extreme environmental conditions

Technical specifications:

Rotation speed:
- horizontal – 0.01°~30°/s
- tilt – 0.01°~12°/s
Rotation angle:

Presets: 200 (range: 1 ~ 80, 131 ~ 250)
Preset accuracy: ±0.1°
Return to home position: optional
Auto patrol: 8 routes, up to 10 points on each route
Auto return: configurable from 1 to 60 minutes
Auto scan: 1 cycle
Control protocols: Pelco-D / Pelco-P (optional)
Baud rate: 2400 / 4800 / 9600 / 19200 bps (optional)
Communication interface: RS485 with angle query support (or RS422 with real-time support)
Network interface: Optional
Heating function: Optional
Power supply: DC28V ±20%; AC24V ±20%, 50/60Hz
Power consumption: ≤80W
Operating temperature: -25℃ ~ +65℃
Storage temperature: -40℃ ~ +70℃
Load: 35kg
Mounting: top mounting
Protection class: IP66
Device weight: 23kg
Dimensions: 349 × 206 × 380mm (L × W × H) ±5mm
Lens Support: Supported, automatic adaptation to FUJINON, COMPUTAR, KOWA, etc.
Lens Control Speed: Zoom and focus control speed is continuously adjustable
OSD Menu: Not supported (optional)
MTBF (Mean Time Between Failures): ≥ 5000 hours
MTTR (Mean Time to Repair): ≤ 30 minutes

OEM options:

Color:

gray (default)

olive green
sea gray
white

Driver type:
stepper motor (default)
servo drive

Interface position:

bottom nut (default)

base nut

base connector

Installation method: bottom-up mounting (default)

1. Address Setting

When setting the PT address (Pan/Tilt) using SW1, open the small window on the front of the pan/tilt platform.

* The figure above shows an example of part of the address code. Other addresses are set in a similar way according to the binary system.

2. Baud Rate Setup

The pan/tilt platform supports the following baud rates: 2400 bps, 4800 bps, 9600 bps, 19200 bps. Setting is done using switches SW1-9 and SW1-10:

Rotating platforms

SP5035 intelligent control turntable

Rotating platforms

SP5035 intelligent control turntable